Reloading Tools

Lee loader.45acp

FEATURES
-Complete reloading system for.45 ACP
-Does not include rubber mallet

Lee loader.30-06

FEATURES
-Complete reloading system for.30-06
-Does not include rubber mallet

Lee shell plate carrier #11

FEATURES
-Lee Pro Carrier #11 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

Other Features: Includes large primer feeder #11 shellplate, & carrier

Lee double cavity mold.277-135-rf w/handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Other Features: For gas checks

Lee double cavity mold.309-113-f w/handles

FEATURES
-Produces a gas checked .309 diameter 113 grain round
-Flat bullet
-Suitable for .30 caliber cartridges
-Handles included

Lee press shellholder r-3

FEATURES
-R-3 universal shell holder
-For.30-30, 6.5x55 Mauser, .32-40 & similar

Other Features: Fits rifles: 30 herrett; 22 savage; 30/30 win; 219 zipper; 32 win spec; 25/35 32 win s.L.6.5x55 mauser; 32/40 win;7x30 waters; 356 win; 7.5mm schmidt 375 win; 7.65x53 arg master 38/55 win

Lee collet style crimp die.45 long colt

FEATURES
-.45 Colt
-Incorporates a collet to apply a rifle type crimp to the case
-Makes these very difficult to crimp cartridges a delight to reload
-Bullets do not need a crimp groove, as the collet is so powerful it will form one

Note: This die is not carbine.

Lee double cavity mold.452-230-tc w/handles

FEATURES
-.452 diameter
-230 grain
-Truncated conenose bullet
-Suitable for cartridges like.45 ACP, .45 Colt
-Handles included

Lee quick trim die body.375 ruger_

FEATURES
-Quick trim die for .357 Ruger

Lee quick trim die body.204 ruger

FEATURES
-Quick trim die for .204 Ruger

Lee collet die set.338 lapua magnum lg series

FEATURES
-.338 Lapua
-Large series 2 piece Collet die set
-1 1/4x12 thread
-Use with Classic Cast Press only
-Collet neck sizing die
-Bullet seating die
-Instructions

Lee carbide 3-die set.480 ruger

FEATURES
-For .480 Ruger
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee press shellholder r-11

FEATURES
-R-11 universal shell holder
-For .444 Marlin, .44 Special/Magnum, .45 Colt& similar

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee quick trim die body.35 remington

FEATURES
-Quick trim die for .35 Remington

Lee six cavity mold 45a 230gr-2r no handle

FEATURES
-Six Cavity Mold
-.452 Diameter
-230 grain
-Round nose bullet
-Suitable for cartridges like .45 ACP, .45 Colt, etc.
-Lube & handles sold separately

Lee double cavity mold tl.358-148-wc w/handles

FEATURES
-.358diameter
-148 grain
-Wad cutternose bullet
-Suitable for cartridges like .38 Special, .38 S&W, .38 Colt New Police, .357 Magnum
-Handles included

Lee six cavity mold.38 158gr-swc no gc no handle

FEATURES
-Six Cavity Mold
-.358 Diameter
-158 grain
-Semi Wad Cutter nose bullet
-Suitable for cartridges like .38 Special, .38 Smith & Wesson, .38 Colt New Police, .357 Magnum
-Lube & handles sold separately

Lee press shellholder r-21

FEATURES
-R-21 universal shell holder

Lee powder thru charging die.44 special/.44 magnum

FEATURES
-For .44 Special
-Powder Thru Expanding die
-Charges the case while expanding the case mouth
-Used with powder funnel adapter or the Auto Disk or Auto Pro Disk powder measure

Lee full length 3-die set.30-40 krag

FEATURES
-Pacesetter 3 die set for .30-40 Krag
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee full length 3-die set 7mm-08 remington

FEATURES
-Pacesetter 3 die set for 7mm-08 Remington
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Lee case collator

FEATURES
-Fits on top of the case feeder
-Makes filling the tubes faster on the Pro 1000 & Load-Master Presses
-Does not include case feed tubes

Lee quick trim die body.270 winchester

FEATURES
-Quick trim die for .270 Winchester

Lee full length 3-die set.300 savage

FEATURES
-Pacesetter 3 die set for .300 Savage
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee full length 3-die set.308 winchester

FEATURES
-Pacesetter 3 die set for .308 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee collet style crimp die only.30m1 carbine/.32-20win

FEATURES:
-Caliber: 30 Carbine
-Factory Crimp
-Threads: 7/8" - 14

Lee factory crimp die only.300wsm_

FEATURES:
-Caliber: 300 Winchester Short Magnum
-Factory Crimp
-Threads: 7/8" - 14

Lee double cavity mold.450-200gr w/handles_

FEATURES
-Lee 2-Cavity Bullet Mold
-450-200-1R (450 Diameter)
-200 grain Round Nose (1 Ogive Radius Conical)
-Machined aluminum mold blocks and hard anodized sprue plate, rust resistant
-Tangential cut off which helps to eliminate the nip at the sprue cut off
-Includes hardwood handles
-Great choice for reloaders looking for a quality mold at an affordable price

Lee six cavity mold 9mm 124gr-2r no handles

FEATURES
-Six Cavity Mold
-.356 Diameter
-124 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

Lee safety powder scale- red

FEATURES
-Reliable, accurate, & simple to use
-Beam is made from a tough Phenolic
-Sensitive & readable to 1/20 grain