Reloading Tools

FEATURES
-Progressive 3-hole reloading kit for .40 Smith & Wesson
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Reliable, accurate, & simple to use
-Beam is made from a tough Phenolic
-Sensitive & readable to 1/20 grain

FEATURES
-Sturdy steel rack with fasteners designed for the Lee Reloading stand
-Conveniently holds your dies at the ready
-Especially helpful when loading small batches of ammo with frequent die changes
-Can also be wall or bench mounted

FEATURES
-Ultimate 4-die set for 7mm Remington Magnum
-Full length resizing die
-Collet necksizing die
-Easy adjust dead length bullet seating die
-Factory Crimp Die
-Shell holder
-Powder measure
-Load data

FEATURES
-For .223 Winchester Super Short Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

FEATURES
-Six Cavity Mold
-.356 Diameter
-95 grain
-Round nose bullet
-Suitable for cartridges like .380 Auto, 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

FEATURES
-Trim & chamfer in a matter of seconds
-Hex shank snaps into cordless screwdriver or drill(not included)
-Includes power Quick Trim adapter, chip catcher & deluxe cutter assembly

*This tool also requires a cartridge specific pistol Quick Trim die or rifle Quick Trim die

FEATURES
-Pro Shell Plate #19
-For quick caliber change for the Pro 1000 Press
-For .40 Smith & Wesson, 10mm Auto, 9mm Luger, .38 Super, .38 Auto, .41 AE& similar

FEATURES
-Short Charging Die for use with the Lee Auto-Disk, Pro Auto-Disk, an Auto-Drum Powder measure
-Works with .860 to 1.760" long (.22 Hornet to .223 Remington)
-.223 bullet diameter and larger due to powder bridging

FEATURES
-Fits on top of the case feeder
-Makes filling the tubes faster on the Pro 1000 & Load-Master Presses
-Does not include case feed tubes

FEATURES
-Case Feed Tubes includes 7 replacement case feeder tubes for the Pro 1000 & Load Master

FEATURES
-Pro Shell Plate #11
-For quick caliber change for the Pro 1000 Press
-For .44 Special, .44 Magnum, .45 Colt & similar

FEATURES
-Pro Shell Plate #9
-For quick caliber change for the Pro 1000 Press
-For .41 Magnum& similar

FEATURES
-Pro Shell Plate #7A
-For quick caliber change for the Pro 1000 Press
-For .30 M1 Carbine, .32-20, .32 Auto & similar

FEATURES
-Lee Pro Shell Plate #4
-For quick caliber change for the Pro 1000 Press
-For .222, .223, .380 Auto, .32 S&W Long, .32 H&R Magnum,& similar cases

FEATURES
-Lee Pro Shell Plate #2
-For quick caliber change for the Pro 1000 Press
-For .45 ACP, .45 GAP, .400 Cor-Bon,& similar cases

FEATURES
-Lee Pro Shell Plate #1
-For quick caliber change for the Pro 1000 Press
-For .38 Special, .357 Mag & similar cases

FEATURES
-Lee Pro Carrier #11 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

FEATURES
-Lee Pro Carrier #4 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

FEATURES
-Lee Pro Carrier #2 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

FEATURES
-Lee Pro Carrier #1 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

FEATURES
-Progressive 3-hole reloading kit for .380 Auto
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Progressive 3-hole reloading kit for 9mm Luger
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Progressive 3-hole reloading kit for .45 ACP
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Progressive 3-hole reloading kit for .38 Special & .357 Magnum
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-.338 Lapua
-Large series 2 piece Collet die set
-1 1/4x12 thread
-Use with Classic Cast Press only
-Collet neck sizing die
-Bullet seating die
-Instructions

FEATURES
-Progressive 3-hole reloading kit for .44 Magnum & .44 Special
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Progressive 3-hole reloading kit for .223 Remington
-PaceSetter 2-die set (full length sizer, bullet seater/crimper plate, Auto-Drum powder measure,
Double Disk Kit, rifle charging die, case and priming system)
-Only accepts 3 hole turret

FEATURES
-Undersize mandrel for 7mm Remington Magnum, 7x57, 7mm-08 & 7mm Express
-For a tighter fit than a factory collet die

FEATURES
-Pacesetter 3 die set for 6.5x55 Swedish Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES
-For .380 Pistol
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES
-For .40 Smith & Wesson
-Powder Thru Expanding die
-Charges the case while expanding the case mouth
-Used with powder funnel adapter or the Auto Disk or Auto Pro Disk powder measure