Reloading Tools

Rcbs fl die set.204 ruger gp-a

FEATURES
-Caliber: .204 Ruger
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.22 hornet gp-a

FEATURES
-Caliber: .22 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs exp-decapping unit.30/7.62mm
Other Features: Features an expander rod and ball and a decapping pin.Its used for sizing dies to de-prime the case and expand the neck in cartridges

Rcbs lock ring assembly 1-1/2" for.50bmg
Other Features: This locking ring is designed specifically ffor 1.5-12 inch dies used for reloading.50bmg ,.416 barrett, and.460 steyr

Rcbs decapping pins-large 5pk

FEATURES
-Designed for collet-style rods for large primer cartridges, as well as for current
competition-style dies/rods, 7 TCU and 35 Whelen

Other Features: Will not fit reloader special dies

Rcbs decapping pins- small 5pk

FEATURES
-For pre-1990s collet-style rods designed for small-primers cartridges, as well as for
current competition-style dies/rods, X Die® mandrels, PPC and .357 Sig

Other Features: Will not fit reloader special dies

Rcbs auto prime feed tube assembly small

FEATURES:
-Stops misfires as greasy fingers never need to touch primers
-100 primer capacity
-Small primer only tube

Rcbs auto prime feed tube assembly large

FEATURES:
-Stops misfires as greasy fingers never need to touch primers
-100 primer capacity
-Large primer only tube

Rcbs auto primer feed combo

FEATURES
-Drops primers one at a time into the primer plug & sleeve
-Helps stop misfires, as greasy fingers never need to touch primers, & the nylon primer
pick-upkeeps primers from falling out
-Has a tube capacity of 100 primers
-Fits the Rock Chucker® II and Reloader Special Presses

Note: Not for use with RC Supreme

Rcbs primer pocket brush head large

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts

Rcbs primer pocket brush combo

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts for large & small primer pockets
-Includes no-roll accessory handle

Rcbs primer pocket swager combo-2

FEATURES
-Redesigned to fit a larger group of cases
-Swaging rods are made from stronger, high-tensile steel
-Not for use on progressive presses

Other Features: Works with most 7/8-14 threads reloading presses

Rcbs primer tray-2

FEATURES
-Handles today's larger primer package quantities
-The square shape makes it easier to handle
-A grooved tray surface quickly positions primers anvil-side up

Rcbs primer pocket swager bench tool
Other Features: This dedicated bench mounted primer pocket swager makes removal of primer pocket staking/crimp a simple task.

Rcbs shell holder rack

Rcbs automatic priming tool

FEATURES
-Fast, accurate & highly sensitive due to a unique single-stage lever system
-Primers feed through the auto primer feed tube one by one, preventing potential
contamination by oily fingers
-2 primer rod assemblies & 2 primer feed tubes are included

Other Features: Uses standard press shell holders

Rcbs universal loading block holds 50 cases

FEATURES
-Designed to fit most standard rifle or pistol cases, including the WSM, WSSM & Ultra Mag
families of cartridges
-Two-side design offers three different case fits per side
-50-case capacity

Rcbs collet for bullet puller.500 caliber

FEATURES
-Caliber: .500 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs bullet puller less collet

FEATURES
-Designed to easily pull jacketed bullets without damaging them
-Utilizes the standard 7/8-inch-14 thread
-May be used in any single-stage reloading press with this thread
**Not for use with rimfire cartridges

Rcbs collet for bullet puller.20 caliber

FEATURES
-Caliber: .20 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs collet for bullet puller.44 caliber/11mm

FEATURES
-Caliber: .44 Cal/11MM
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs collet for bullet puller.30 caliber/7.35mm

FEATURES
-Caliber: .30 Caliber/7.35mm
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs collet for bullet puller.25 caliber

FEATURES
-Caliber: .25 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

Rcbs rotary case trimmer pilot.500 caliber

FEATURES
-.500 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.45 caliber

FEATURES
-.45 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.44 caliber

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.40 caliber

FEATURES
-.40 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.35 caliber

FEATURES
-.35 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.32 caliber

FEATURES
-.32 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.30 caliber

FEATURES
-.30 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.28 caliber

FEATURES
-.28 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Rcbs rotary case trimmer pilot.27 caliber

FEATURES
-.27 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only