Scope Mounts And Rings

Egw scope base win 70 wsm picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 WSM
-0 MOA
-Center Spread: 3.514"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base win 70 std/la (pre 64) picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Long Action (Pre '64)
-20 MOA
-Center Spread: 3.805"*
-Overall Length: 7.064"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base win 70 std/la (pre 64) picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Long Action (Pre '64)
-0 MOA
-Center Spread: 3.805"*
-Overall Length: 7.064"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base win 70 sa picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Short Action
-20 MOA
-Center Spread: 3.259"*
-Overall Length: 6.276"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base win 70 sa picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Short Action
-0 MOA
-Center Spread: 3.259"*
-Overall Length: 6.276"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base savage a17/a22 mag picatinny rail 20 moa
Other Features: Made in usa, fits savage a17/a22 mag, 20moa

Egw scope base savage a17/a22 picatinny rail

FEATURES:
-Aluminum
-Matte black
-Fits: Savage A17
-Length: 5.882"
-Center spread: 3.181"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa, fits savage a17

Egw scope base savage 42 picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage 42
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

Other Features: Made in usa

Egw scope base savage edge/ axis picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Axis/Axis II (formerly the Savage Edge) rifle
-20 MOA
-Center Spread: 4.321"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa

Egw scope base savage edge/ axis picatinny rail silver

FEATURES:
-Aluminum
-Matte silver
-Fits: Savage Axis (formerly Savage Edge) rifle
-Length: 7.458"
-Center spread: 4.31"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa

Egw scope base savage 212 picatinny rail

FEATURES:
-Aluminum
-Matte black
-Fits: Savage 212
-Length: 7.458"
-Center spread: 4.629"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa,

Egw scope base savage 93 picatinny rail 20moa 1 5/8"prt
Other Features: Made in usa, for savage 93, 1-5/8" ejection port, 20 moa

Egw scope base savage 93 picatinny rail 0moa 1 5/8"port

FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.8" Mount
-Fits Savage 93

Other Features: Made in usa, for savage 93, 1-5/8" ejection port

Egw scope base savage mark ii picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Mark II & 93 rifles
-20 MOA
-Center Spread: 3.345"*
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, for savage mark ii with 1-3/8" ejection port

Egw scope base savage flat back la picatinny rail 20moa
Other Features: Made in usa, this savage base will work with any long action flat back savage with an ejection port, 20 moa

Egw scope base savage flat back la picatinny rail 0moa

FEATURES:
-Savage Flat Back Long Action
-Machined From: Solid 7075 T6 Aircraft Grade Aluminum
-Finish: Matte Black
-Mounting Hardware: Socket Head Torx® Screws & Wrench provided
-Center Spread: 3.805"
-Overall Length of Mount: 7.064"

Other Features: Made in usa, this savage base will work with any long action flat back savage with an ejection port

Egw scope base savage round back la picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For long action round back Savage rifles
-20 MOA
-Center Spread: 4.630"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-This mount does not fit the 212

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, this savage base will work with any long action round back savage with an ejection port will not fit the 212

Egw scope base savage 220 slug gun shortened picatinny silver

FEATURES
-Picatinny-style base
-Silver Anodized finish
-Designed especially for the Savage 220 slug gun
-Domestic 6061 T6 Extruded Aluminum
-Silver Anodized
-Comes standard with a bevel on both sides making it ambidextrous
-Hex head screws & wrench provided
-Center spread: 4.63"
-Overall length: 6.85"

Other Features: Made in usa, this savage base was designed especially for the savage 220 slug gun.Silver base

Egw scope base savage 220 slug gun shortened picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage 220 slug gun
-0 MOA
-Center Spread: 4.630"*
-Overall Length: 6.850"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-This mount does not fit the 212

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, this savage base was designed especially for the savage 220 slug gun.

Egw scope base savage round back la picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For long action round back Savage rifles
-0 MOA
-Center Spread: 4.630"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-This mount does not fit the 212

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, this savage base will work with any long action round back savage with an ejection port will not fit the 212

Egw scope base savage round back sa picatinny rail 20moa

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-20 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, this savage base will work with any short action round back savage with an ejection port

Egw scope base savage round back sa picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-0 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

Other Features: Made in usa, this savage base will work with any short action round back savage with an ejection port

Egw scope base rem 783 la picatinny rail

FEATURES:
-Aluminum
-Matte black
-Fits:long action Remington 783
-Length: 7.064"
-Center spread: 3.54"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa

Egw scope base rem 783 sa picatinny rail

FEATURES:
-Aluminum
-Matte black
-Fits:short action Remington 783
-Length: 6.670"
-Center spread: 3.242"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa

Egw scope base rem 710/770 picatinny rail

Egw scope base rem 1100 picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 1100/11-87
-Center Spread: 1.48"*
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Other Features: Made in usa

Egw scope base rem 870 picatinny rail

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 870
-0 MOA
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

Other Features: Made in usa

Egw scope base rem 740/742/760 ithaca 37 picatinny rail

FEATURES:
-Aluminum
-Matte black
-Fits: Remington 740, 742, & 760rifles and Ithaca 37 and Weaver 62
-Length: 5.488"
-Center spread: 1.648"
-Height: .4"
-Mounting hardware included

Other Features: Made in usa, weaver 62 scope mount

Egw scope base rem 4/6/7400/ 750/7600 picatinny rail

FEATURES:
-Aluminum
-Matte black
-Picatinny/Weaver style
-Fits: Remington 4, 6, 750, 7600 & Benelli auto
-Mounting hardware included

Other Features: Made in usa, also fits benelli auto, super black eagle, m2, weaver 93 scope mount

Egw scope base rem 660/600 mohawk picatinny rl mnt 0 moa
Other Features: Made in usa, remington 660/600 mohawk picatinny rail scope mount, 0 moa

Egw scope base rem xp/xr 100 sa picatinny rail mount 0 moa

FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.48" Mount
-Fits Remington XP/XR 100, Model 7 Short Action

Other Features: Made in usa, remington xp/xr 100, model 7 4-hole short action picatinny rail scope mount 0 moa

Egw scope base rem xp/xr 100 3-hole pctny rail mount 0 moa
Other Features: Made in usa, remington xp/xr 100, model 7 3-hole short action picatinny rail scope mount 0 moa